One tank, several purifiers
A single QT unit can serve a bank of Q-series cabinets — for example a Q200 and a Q300 on an outdoor double-stack frame — instead of a supply and drain per cabinet.

Smart Water Tank · KL-D-QT200 / QT300 / QT400 / QT500
A stainless tank, pump and control cabinet that supplies and recirculates the wash water for KL-D-Q self-cleaning precipitators — one tank serving several purifiers, so a rooftop bank of ESP units does not need a plumbed line to each one.
Overview
A self-cleaning ESP needs water where the ESP is. On a rooftop plant deck with six purifiers spread across it, running a supply and a drain to each cabinet is the expensive part of the project. The KL-D-QT puts the water in one place: a stainless tank with a pump and a controller that feeds the wash cycles of the units connected to it, then recirculates and filters what comes back.
Four sizes — QT200, QT300, QT400 and QT500 — match the range of Q-series cabinets. The tank is CE certified and already quoted into German projects, and it is built for outdoor installation, which is where most plant decks put it.
Think of it as the water half of the system: the purifier decides when to wash, the tank makes sure there is water to wash with, and the pair turn a manual maintenance task into something that happens without anyone scheduling it.
Need the full datasheet with drawings and test references? Ask and we will send it with the quotation.
Engineering
What matters more on a real installation than on a specification sheet.
A single QT unit can serve a bank of Q-series cabinets — for example a Q200 and a Q300 on an outdoor double-stack frame — instead of a supply and drain per cabinet.
Wash water is filtered and reused rather than sent straight to drain, which matters both for running cost and on sites where water supply is the constraint.
Weather-resistant stainless construction so the tank can sit outdoors beside the purifiers it serves, at the same level, with a short pump run.
Adds to an existing self-cleaning installation when kitchen capacity grows, or upgrades a manual ESP to automated washing without re-plumbing the building.
Specifications
| Model | Function | Dimensions L×W×H (mm) | Body | Supply |
|---|---|---|---|---|
| KL-D-QT200 | Wash-water supply, 2-unit class | 980 × 990 × 850 | Stainless steel | 220 V / 50 Hz |
| KL-D-QT300 | Wash-water supply, 3-unit class | on request | Stainless steel | 220 V / 50 Hz |
| KL-D-QT400 | Wash-water supply, 4-unit class | on request | Stainless steel | 220 V / 50 Hz |
| KL-D-QT500 | Wash-water supply, 5-unit class | on request | Stainless steel | 220 V / 50 Hz |
The series is configured per project: tank volume, pump duty and control linkage are set by how many purifiers the tank serves and how often they wash. QT200 dimensions are fixed at 980 × 990 × 850 mm; larger models are quoted on drawing. Certification: CE.
Applications
The recommended model is the configuration we would quote for a standard layout; longer, split or stacked runs are quoted on drawing.
Several Q-series cabinets on an outdoor frame, one water point instead of six.
Recommended: KL-D-QT300 / QT400
A restaurant floor where the purifiers sit in a shared plant room and the water is centralised.
Recommended: KL-D-QT400
Buildings where the supply is metered or intermittent, so recirculation is the only way to run automated washing.
Recommended: KL-D-QT200 / QT300
An existing manual ESP installation being converted to scheduled washing without opening the building fabric.
Recommended: KL-D-QT200
FAQ
Not necessarily. If the cabinet can be plumbed to mains water and a drain, the external washing main unit that ships with the purifier is enough. The QT tank is for sites where plumbing each cabinet is impractical, where several purifiers share one water point, or where water is scarce and recirculation matters.
It depends on tank volume and how often the units wash. As a guide the QT200 covers a two-unit class and the QT500 a five-unit class, but the real answer comes from your wash interval and the number of cells per cabinet — send the layout and we will size it.
Yes. The tank is stainless and weather-resistant, and it is normally installed on the same plant deck as the purifiers so the pump run stays short.
Next step
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.