Note · Compliance
Commercial kitchen pollution control unit: what the term includes
The phrase appears in planning conditions and tender documents, usually with a performance figure attached and no definition. It describes an outcome, and the outcome can be reached several ways.
Short answer. A commercial kitchen pollution control unit is the complete exhaust treatment package: grease filtration, odour control where required, the fan, and the monitoring that proves it works. It sits between the hood and the discharge point.
Read a planning condition carefully and it usually asks for two things: no visible fume at the boundary, and no odour nuisance at the nearest sensitive receptor. Neither of those names a technology. A PCU is the package that delivers them.
What the package contains
- Grease stage. Baffle plus electrostatic cell, 95–98% on aerosol.
- Odour stage, where required. Bonded carbon or an impregnated media, sized on residence time.
- Motive power. A fan selected on the loaded system resistance, not the clean one.
- Discharge. Stack height and velocity chosen to give the plume somewhere to go.
- Monitoring. Differential pressure, airflow proving, and on larger systems a run-hours log.
Why the discharge matters as much as the filter
A perfect filter with a discharge at ground level next to a seating area still produces complaints. Stack height and exit velocity dilute and disperse what remains; that is a dispersion question, not a filtration one, and it is often the cheaper half of the fix.
How to specify one without over-buying
Start from the receptor distance and the cooking load. A site 50 m from the nearest window with a 6 m stack rarely needs carbon; a site with a flat above the kitchen usually does. State the performance figure you must meet — mg/m³ at outlet and, if odour is the issue, an odour concentration — and let the vendor assemble the train.
What you should not accept is a single percentage on a single box. The ESP filter range forms the grease stage of a PCU; the carbon stage and the stack are specified with it, and the whole package is what a planning condition is actually about.
The engineering behind this is the same in every ESP filter we ship, from the 4,000 m³/h single cabinet to the 64,000 m³/h stack.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
