ESP filters 4,000–64,000 m³/h · CE certified · ISO 9001 · Shipping to 80+ countries

info@souniny.com / WhatsApp +86 189 2910 1713

Note · Technology

Electrostatic air filtration: where it sits among filter standards

Air filtration is measured with standards written for fibrous media: arrestance, fractional efficiency, ePM classes. An electrostatic stage is not media, and forcing it into those classes produces numbers that are technically true and practically misleading.

Short answer. Electrostatic air filtration removes particles by electric field rather than by interception in a medium, so ISO 16890 and MERV ratings do not describe it well. Compare on mass removal of a defined aerosol and on outlet concentration instead.

The standards are not wrong; they measure a different thing. ISO 16890 classifies filters by fractional efficiency against a test aerosol after conditioning. A precipitator's efficiency depends on field strength, residence time and plate cleanliness, and it changes continuously with loading — which is precisely what a media rating is designed to hold constant.

What the media ratings capture

Fractional efficiency at three particle sizes, converted into an ePM class. Useful when comparing filters, and useful as a sanity check on a hybrid system where the media stage does the polishing.

What they miss

Two things. First, a precipitator's efficiency on the finest fraction is typically better than a medium of comparable initial resistance, because the electric force acts on particles too small for interception. Second, that efficiency declines between washes, and a rating has no way to express a maintenance dependency.

How to compare honestly

  • Mass removal on a defined aerosol, measured at the outlet: 95–98% and 1–2 mg/m³ for a commercial kitchen cell.
  • Plate area per 1,000 m³/h, which predicts how the unit behaves when loaded.
  • Resistance clean and loaded, because that is what the fan sees.
  • Wash interval at the stated load, which converts all of the above into a service cost.

Where the two technologies belong together

In series, not in competition. A cell takes the bulk load cheaply and a media stage polishes what is left, which is why hybrid units exist and why a kitchen with an odour condition runs a cell plus carbon rather than a bigger cell.

On grease, the cell is the right first stage at any airflow from 4,000 to 64,000 m³/h; the ESP filter range states mass efficiency per model rather than borrowing a filter class.

If you want the short version of this note, the electrostatic precipitator page summarises the range in a table you can scan in a minute.

Next step

Send the layout. We will confirm the model.

Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.

Size it in 30 seconds Chat on WhatsApp

Typical reply within one working day · MOQ 1 unit