Note · Technology
Electrostatic dust precipitator: dust is not grease
A dust precipitator looks like a kitchen cabinet and is a different engineering problem. The particles are dry, the loading can be an order of magnitude higher, and some of them will burn.
Short answer. An electrostatic dust precipitator collects dry particulate — flour, wood, metal oxide, mineral dust — on plates that are rapped or washed. Combustible dust adds explosion-ventilation, earthing and interlock requirements that a grease unit does not need.
The electrical principle is identical. Everything around it changes: the collection surface, the removal method, the enclosure rating, and the safety case.
Loading and particle size
Kitchen exhaust carries 5–30 mg/m³ of grease. A woodworking shop can carry grams per cubic metre of dust, and a bakery line carries flour at concentrations where a spark is a serious event. Plate area per unit airflow is therefore much larger, and the pre-separation stage does far more of the work.
The hazard that grease does not have
Combustible dust inside an enclosure with a high-voltage field is a recognised risk. The design response is standard and non-negotiable: explosion venting sized to the enclosure, earthing and bonding on every panel, interlocked isolation before any door opens, temperature monitoring, and no accumulation anywhere in the hopper.
Grease has its own risk — a duct fire — but the mitigations are different: cleaning regime and a fire damper rather than explosion venting.
Where a dust unit is the right answer
Metal oxide fume from welding and cutting, where the catch is fine and the value is in the extraction; mineral dust where the loading is steady and the particle size is sub-micron; some food powders where a wet collector is unacceptable for hygiene reasons. Where the dust is coarse and the loading is high, a cyclone or a bag filter usually wins on cost per unit of dust removed.
Why kitchens are a separate product line
Not because the physics differs, but because the waste stream, the cleaning method and the fire case all differ. A cabinet designed around a wash cycle and a grease drain is the wrong machine for flour, and a dust unit with explosion venting is the wrong machine for a restaurant.
The ESP filter range here is the grease version throughout; dust applications are quoted separately against the process data.
A kitchen ESP is only as good as its weakest gasket, which is why the cabinet on the front page is built around service access rather than looks.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
