Note · Technology
Electrostatic precipitation: the physics behind the box
Long before it was a kitchen appliance, electrostatic precipitation was how smelters stopped poisoning the towns around them. The physics is unchanged; only the packaging and the gas temperature have moved.
Short answer. Electrostatic precipitation is the separation of particles from a gas by charging them electrically and collecting them on an oppositely charged surface. It works best on particles between roughly 0.1 and 10 micrometres — exactly the size range of cooking grease aerosol.
The process has three physical ingredients: a corona discharge to create ions, a field to move the charged particles, and a surface for them to land on. Remove any one and it stops. That is why a cabinet with a dead ioniser collects almost nothing even though its plates are still energised.
Where the ions come from
A fine wire at high potential produces a non-uniform field: very strong at the wire, much weaker at the plate. Above a threshold — a few kV at kitchen spacing — the air immediately around the wire breaks down locally and a corona forms. It glows faintly blue in a dark cabinet, which is a useful diagnostic if you ever run one with the door open on a bench.
The corona produces both positive and negative ions. In a negative corona, which is what commercial precipitators use, the ions drift toward the earthed plates and charge particles on the way.
Why particle size decides everything
Precipitation is weakest at both ends of the size range, for opposite reasons. Very large particles are heavy and drop out before they reach the plates; very small ones — below about 0.1 micrometre — move so slowly in the field that Brownian motion beats the electric drift. The sweet spot is 0.1 to 10 micrometres.
Cooking grease aerosol sits almost exactly in that window, which is not a coincidence: it is why the technology transferred from smelters to kitchens so cleanly. Soot from a charcoal grill also sits in the window. Steam does not — water vapour is a gas until it condenses, and condensed droplets are large and only weakly charged.
Where the efficiency ceiling comes from
Deutsch's equation relates efficiency to plate area, drift velocity and gas flow. The practical version: double the plate area and you do not double the efficiency, because the last few percent take disproportionate area. This is why 95–98% is the practical band for a commercial kitchen cabinet and 99.9% belongs to a plant with several fields in series and a much bigger footprint.
It also explains the shape of the market. Below 95% you get visible plume and complaints; above 98% you are paying for plate area that a kitchen cannot house. The band is a physical compromise, not a commercial one.
Why the kitchen version is small
A smelter precipitator handles gas at 300 °C and metres per second. A kitchen cabinet handles gas at 40–60 °C and 2–3 m/s, which is why it can be a stainless box rather than a brick chamber. Lower temperature also means grease condenses on everything, which is the design problem the industrial version never had to solve.
That condensation is why every electrostatic precipitator built for a kitchen is really a drainage system with a cell inside it. The physics is a century old; the plumbing is where the engineering is.
The electrostatic precipitator we would put on a job like this is the KL-D-J, in whichever size the airflow calculation returns.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
