ESP filters 4,000–64,000 m³/h · CE certified · ISO 9001 · Shipping to 80+ countries

info@souniny.com / WhatsApp +86 189 2910 1713

Note · Technology

Electrostatic precipitator applications: a map by industry

The technology is a hundred years old because it keeps finding new users. Each industry arrives with a different particle, a different temperature and a different reason that media filtration will not do.

Short answer. Precipitators are used wherever fine particulate has to be removed at scale or where media would be consumed too fast: power and biomass flues, cement and lime kilns, steel and foundry fume, commercial kitchens, food processing, welding and woodworking.

Power and biomass

Fly ash downstream of a boiler, several hundred thousand m³/h, hot and dry. The precipitator is the last stage before the stack and often the difference between passing and failing an opacity limit. Dry removal, rapping, hoppers.

Cement and lime

Kiln dust, high temperature, abrasive. Plate area is large, maintenance is planned around production campaigns, and the collected dust often goes back into the process.

Steel and foundry

Metal oxide fume from melting and casting. Fine, sometimes sticky, often hot. Frequently preceded by a hood and a cooler, and followed by a bag filter where the limit is very tight.

Commercial kitchens

Grease aerosol at 40–60 °C, 4,000–64,000 m³/h, wet-washed. The reason is different from the industrial cases: here the motive is the visible plume, the duct fire load and the planning condition, not an emission limit on a stack.

Food processing

Fryers, ovens, smokehouses, rendering. High grease load, often saturated gas, and a hygiene requirement that rules out media filters that become a bacterial substrate. Where odour matters, a carbon stage follows.

Welding and woodworking

Fume and oil mist in a workshop, at modest airflow but continuous. The economic argument is the same as a kitchen: the media would be replaced constantly, the cell is washed instead.

What changes between them

Temperature, catch state, and cleaning method — in that order. Everything else follows. A hot dry gas can be rapped; a warm greasy one cannot. That single line explains why the kitchen product and the boiler-house product look so different despite sharing a principle.

Our own work is the commercial kitchen end and the food-processing end of that map: 4,000–64,000 m³/h, wet wash, optional carbon. The electrostatic precipitator range is listed with the applications each model is built for.

The engineering behind this is the same in every ESP filter we ship, from the 4,000 m³/h single cabinet to the 64,000 m³/h stack.

Next step

Send the layout. We will confirm the model.

Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.

Size it in 30 seconds Chat on WhatsApp

Typical reply within one working day · MOQ 1 unit