ESP filters 4,000–64,000 m³/h · CE certified · ISO 9001 · Shipping to 80+ countries

info@souniny.com / WhatsApp +86 189 2910 1713

Note · Technology

The electrostatic precipitator process, stage by stage

Asked what the process is, most people describe the cell. The cell is the interesting part and the middle part. Treated as a process, a precipitator installation starts at the hood and ends at the drain, and the two ends account for most of the disappointment.

Short answer. Five stages: capture at the hood, coarse pre-treatment, ionisation, plate collection, and removal of what was collected. A cabinet that does the middle three well still fails if the first or last is neglected.

Process thinking is useful because it assigns the failure to the right stage. A plume at the roof is usually stage five. Smoke in the kitchen is usually stage one. A unit that trips is stage three. Efficiency that has quietly halved over a month is stage five as well, and nobody notices because nothing has broken.

Stage one: capture

The hood decides how much of the cooking plume ever reaches the cabinet. An overhanging canopy with a 0.3 m skirt and a face velocity around 0.25–0.5 m/s captures a wok line; a low wall-mounted hood over the same range does not, and no amount of downstream filtration fixes air that never entered the duct.

This is the stage where a client most often wants to save money, and the stage where saving it costs the most.

Stage two: pre-treatment

A baffle or mesh filter ahead of the cell catches flame, fibre and the largest droplets. It also flattens the velocity profile, which matters more than people expect: a fast jet down one side of the cabinet loads those plates first and shortens the whole cell's working life.

Stage three: charging

Around 12 kV at the ioniser. Charging efficiency falls if the ioniser is fouled, if humidity is high, or if the supply is derating because the cell is drawing too much current. That last interaction is worth knowing: a dirty cell makes the supply cut back, which makes the ioniser weaker, which lets more grease through, which dirties the cell faster.

Stage four: collection

Residence time in the plate stack is what converts a charged particle into a captured one. In a kitchen cabinet that is a fraction of a second, which is why plate area per unit airflow is the real specification number and cabinet size is the proxy for it.

Stage five: removal

Grease has to leave as liquid through the drain, or it stays and carbonises. On a heavy load the cell wants washing every 7–14 days; on a combi-oven line, monthly is enough. Where the interval will not be honoured — hotel kitchens on rotating staff, dark kitchens with nobody on site — a self-cleaning cabinet with a 1–15 day cycle replaces the human stage entirely.

Both options are built on the same process; only the fifth stage differs. The electrostatic precipitator range covers the manual version and the KL-D-Q covers the automatic one, and the choice is about staffing rather than about performance.

Start from the electrostatic precipitator overview if you need the whole range in one view, then narrow to the model from the airflow.

Next step

Send the layout. We will confirm the model.

Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.

Size it in 30 seconds Chat on WhatsApp

Typical reply within one working day · MOQ 1 unit