ESP filters 4,000–64,000 m³/h · CE certified · ISO 9001 · Shipping to 80+ countries

info@souniny.com / WhatsApp +86 189 2910 1713

Note · Technology

Electrostatic precipitator: what is actually inside the box

Strip away the stainless panels and an electrostatic precipitator is a very short list of parts. Knowing what they are explains nearly every fault, every specification argument and every price difference between one cabinet and another.

Short answer. An electrostatic precipitator charges airborne particles with a high-voltage corona, then collects them on earthed plates. In a commercial kitchen it removes 95–98% of the grease aerosol that would otherwise leave the duct as visible smoke.

The name is older than the kitchen application. Frederick Cottrell filed the first practical industrial precipitator in 1907 to clean smelter off-gas, and the principle has not changed since: charge a particle, put an earthed surface in its path, and let the electric field do the moving. What changed is the packaging. The industrial version is a brick chamber the size of a house; the kitchen version is a stainless cabinet that fits above a false ceiling and gets wheeled out on rails for washing.

That difference in scale is why the domestic and commercial versions are constantly confused. A ductless recirculating unit and a 64,000 m³/h rooftop cabinet share a principle and almost no hardware.

The five parts

Every cabinet in the range, from the 4,000 m³/h single to the 64,000 m³/h stack, is built from the same five elements. The size changes; the list does not.

  • Ioniser. A row of fine wires or spikes held at around 12 kV. The field at the wire is strong enough to strip electrons off air molecules, and those ions attach to grease particles as the air passes.
  • Collection cell. Alternating earthed and charged plates, 7.5 mm apart, where the charged particle is pushed sideways into an oil film.
  • Drain. A sloped floor and a spigot. Grease has to leave the cabinet as liquid, or it leaves as smoke.
  • Insulators. Ceramic or high-tracking plastic, holding the live parts away from the earthed frame. Almost every “the cell will not hold voltage” call ends here.
  • Power pack. A transformer and control board that turns 220 V into the kV the cell needs, and cuts out when the cell arcs.

Why the plate spacing is 7.5 mm

Field strength is voltage divided by distance, so narrower gaps collect better at the same kV — but narrower gaps also bridge more easily with grease, which is conductive once it has been in a hot duct for a fortnight. 7.5 mm is the compromise the commercial kitchen settled on: enough field to hold 95%+ removal, enough clearance that a loaded cell degrades rather than dead-shorts.

It also sets the cleaning regime. A cell at 12 mm would go longer between washes and collect less; a cell at 5 mm would collect more and arc within days on a wok line.

What it is not

It is not a filter, in the sense that you cannot swap a dirty element for a clean one and carry on. It is not an odour unit either — a precipitator removes the aerosol that carries the smell, which is most of the visible problem and a good part of the perceived one, but the volatile fraction needs carbon behind it. And it is not a substitute for the hood: capture at the source still decides whether the room works.

Read the whole cabinet as one system: an electrostatic precipitator is a hood, a duct, a cell and a fan, and the weakest of the four sets the result. That is the assumption every specification we write starts from.

The engineering behind this is the same in every ESP filter we ship, from the 4,000 m³/h single cabinet to the 64,000 m³/h stack.

Next step

Send the layout. We will confirm the model.

Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.

Size it in 30 seconds Chat on WhatsApp

Typical reply within one working day · MOQ 1 unit