ESP filters 4,000–64,000 m³/h · CE certified · ISO 9001 · Shipping to 80+ countries

info@souniny.com / WhatsApp +86 189 2910 1713

Note · Food industry

Industrial food air purification: when the plant is the client

A restaurant has one cooking line and a service that can be interrupted. A food plant has six lines, a production schedule that cannot, and a quality system that wants to see the maintenance records.

Short answer. Industrial food air purification collects from multiple hoods into one treatment train, runs continuously, and is designed around access for cleaning without stopping production. Hygiene documentation is part of the deliverable.

Many sources, one discharge

Ducting six extraction points into one cabinet concentrates the load and simplifies the discharge, but it also means the cabinet sees a blend: fryer grease, oven moisture and grill smoke at once. Balancing the branches becomes the critical design task, because an unbalanced system starves one hood and overloads the filter with another.

Continuous duty

The cabinet cannot be taken offline for a wash during production. Either the plant runs two trains and alternates, or the wash is automated — and at plant scale the automated route is usually the cheaper one over five years because the labour is continuous.

Access without shutdown

Design each stage to be isolated and serviced independently: dampers either side of the cabinet, a cell that comes out on rails into a wash bay, and a carbon bed with front access. A filter that requires a full stop to change is a filter that gets changed late.

Hygiene and documentation

Stainless where the grease sits, no crevices, drainage that can be cleaned, and records. In a plant operating to a food safety standard, the maintenance log is an auditable document, and the equipment should make it easy to produce.

Sizing the train

Total the branch airflows, then size the cabinet on the sum with the design margin applied once rather than per branch. Pressure drop has to be computed across the whole network, since the longest branch sets the fan requirement.

For plants in the 20,000–64,000 m³/h band, a stacked cabinet is usually the compact answer; the electrostatic precipitator range lists the double and triple arrangements with their footprints and flange sizes.

If the site has a constraint we have not covered here, the ESP purifier range includes recirculating, ducted and stacked versions of the same cabinet.

Next step

Send the layout. We will confirm the model.

Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.

Size it in 30 seconds Chat on WhatsApp

Typical reply within one working day · MOQ 1 unit