Note · Compliance
Recirculation ventilation: when the duct is not an option
Recirculation is the answer to a building that cannot be ducted: listed façades, basements, kiosks, food halls with a landlord who owns the roof. It is also the most demanding configuration, because there is no stack to dilute what the filter misses.
Short answer. Recirculation ventilation treats kitchen air and returns it to the room rather than discharging it. It requires grease filtration plus odour control, correctly balanced make-up air, and a monitoring regime — because everything the filter misses stays indoors.
The engineering case is simple. A ducted system gets two chances: filtration, then dispersion from a stack. A recirculating system gets one. Everything the filter train fails to catch goes back into the space where people are eating.
What the train has to contain
Grease stage first — electrostatic, because a baffle alone leaves the fine aerosol that carries both smoke and smell. Then odour control, sized on residence time: a thin carbon pad at high velocity is a gesture, not a stage. Then, on larger systems, a final particulate stage and a monitor that proves the airflow.
Four checks that decide whether it works
- Airflow balance. Recirculating units return the air they take, so the room needs its own make-up and relief or it will pressurise and push cooking air into the dining room.
- Return air position. High level, away from the hood, and never into a return plenum that serves other tenants.
- Carbon replacement. On a schedule based on loading, with the spent media disposed of properly. A saturated bed stops removing odour and starts releasing it.
- Monitoring. Differential pressure across each stage, plus a run-hours log. Without it, the first indication of failure is a complaint.
Where it is permitted
Rules vary by jurisdiction and by building. Some authorities accept recirculation where the cooking load is light and the filter train is proven; others require discharge in all cases. The planning authority and the landlord's mechanical specification both have a say, and they do not always agree — check both before the equipment is ordered.
Where it is the wrong answer
Heavy wok or charcoal cooking in a large room. The filter train becomes a consumable-heavy machine with a short carbon life, and the running cost overtakes the cost of finding a duct route within a couple of years.
The ducted alternative — an ESP purifier in the extract line plus a stack — is cheaper to run wherever a route exists. Recirculation is a constraint-driven choice, and it should be presented as one.
None of it is exotic: it is the standard build of an ESP filter, and the specification sheet on the front page lists every model and pressure drop.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
