Note · Buying
Top electrostatic precipitator manufacturer: what the claim should mean
Every supplier's homepage claims to be a top manufacturer. The claim is only meaningful if it maps to something you can verify before you send a deposit.
Short answer. A real manufacturer builds the cell, tests the supply, issues dimensioned drawings and holds spares. A reseller buys a finished cabinet and adds a logo. The difference shows in the answers to four questions, none of which require a factory visit.
One: who makes the cell
The cell is the product. Plate spacing, straightness and insulator mounting determine whether the unit holds voltage for a decade or arcs in year two. Ask who bends, welds and assembles it, and how the spacing is controlled.
A supplier who talks about the cabinet but not the cell is selling a box.
Two: how the supply is tested
Every cabinet should be energised before dispatch, with the voltage and current recorded on a test sheet that travels with the unit. Ask to see a sample sheet. A factory that tests has one; a reseller has an apology.
Three: can it produce a drawing
Handing, flange positions, drain location, service clearance and weight. A drawing issued in 24 hours means the geometry is known; a drawing that takes a week means it is being requested from somewhere else.
Four: spares and the five-year view
Cell price, insulator price, supply board price, lead time. A manufacturer stocks or builds these; a reseller has to ask, and the asking gets slower every year after the order.
What certificates prove, and what they do not
CE marking covers the electrical build under the Low Voltage and EMC directives. ISO 9001 covers the quality system, not the product. Neither proves efficiency. The efficiency claim is proved by a test method and a measurement, and that is a separate question worth asking.
The verification that costs nothing
Ask for a reference installation of similar airflow and cooking type, then ask that reference two questions: how often is the cell washed, and what does the panel read after a wash. Answers with numbers mean a real installation.
Our own answers are on the ESP filter pages: model, airflow, dimensions, plate arrangement and pressure drop, produced from the same data as the factory's test sheets.
What separates a kitchen ESP that lasts from one that does not is usually the wash regime, and that is a site decision, not a factory one.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
