ESP filters 4,000–64,000 m³/h · CE certified · ISO 9001 · Shipping to 80+ countries

info@souniny.com / WhatsApp +86 189 2910 1713

Note · Technology

What is an electrostatic precipitator?

The question is simple and the honest answer is short, so this note keeps it short: what the device is, what it does to cooking smoke, and where the boundary sits between an ESP and everything else in the exhaust line.

Short answer. An electrostatic precipitator is an air-cleaning device that gives dust or grease particles an electric charge and then pulls them onto earthed plates. It uses no filter media for the particle stage, so there is nothing to throw away — the plates are washed instead.

Most explanations start with the physics. That is the least useful place to start, because the physics explains the mechanism and not the machine. Start with what goes in and what comes out. In goes kitchen exhaust carrying grease aerosol at somewhere between 5 and 30 mg/m³. Out comes air at 1–2 mg/m³ with the visible plume gone, the duct no longer coating itself in fat, and the roof no longer stained.

The mechanism in three moves

Charge. Air passes a high-voltage ioniser. At roughly 12 kV the field near the wire is strong enough to ionise air molecules; those ions collide with grease droplets and give them a net charge.

Collect. The charged droplet enters a stack of plates. Every alternate plate is charged, the others are earthed, so the field between them pushes the droplet sideways until it lands and sticks. The air keeps going.

Drain. The collected film runs down the plates into a sump and out through a drain. That last step is the one that gets neglected, and it is the one that decides whether the cabinet works in month six.

What it is not

Three assumptions worth correcting early.

  • It is not a HEPA or bag filter. There is no media in the particle stage. The removal happens on plates, and the maintenance is a wash rather than a replacement.
  • It is not an odour converter. Odour molecules are far too small to be charged and collected. A precipitator removes the aerosol that carries odour; if the neighbours complain about smell rather than smoke, a carbon stage is what fixes it.
  • It is not maintenance-free. It is maintenance-cheap — no consumables, no landfill — but the cell has to come out on a schedule that matches the cooking.

The numbers that matter at specification stage

Three figures separate one cabinet from another: airflow in m³/h, removal efficiency on grease aerosol, and pressure drop. A commercial unit runs 4,000–64,000 m³/h, removes 95–98% by mass, and adds 107–176 Pa to the system — low enough that a standard centrifugal fan can carry it, high enough that the fan still has to be sized for it.

Anything else on the data sheet — weight, cabinet size, flange dimensions — matters for installation rather than performance. Those are the numbers that decide whether it fits through the door.

If the question behind the question is “which one do I need”, the honest route is airflow first: stations × 2,500 m³/h, a cooking factor, and 20% margin. The calculator does that arithmetic and returns a model. The ESP filter range then tells you whether that model fits the space you have.

If you would rather see the hardware than read about it, the ESP purifier range on the front page covers 4,000 to 64,000 m³/h in one family.

Next step

Send the layout. We will confirm the model.

Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.

Size it in 30 seconds Chat on WhatsApp

Typical reply within one working day · MOQ 1 unit