Guides
ESP selection, installation and maintenance guides — page 6
Notes written from site work: what decides a model, what actually causes efficiency to fall, and which specification mistakes are expensive to fix after commissioning.
- Sizing and duct pressure
- Cleaning intervals that hold
- Odour, carbon and stage order
- Inspection and compliance
What size ESP filter does my kitchen need?
The six numbers that decide which cabinet you buy, worked through on a four-burner range and a six-wok line.
How often should you clean an ESP filter cell?
Wash intervals by cooking type, the four signals that a cell is due, and how to wash one without damaging it.
ESP filter, baffle filter, carbon: which stage does what
Three stages, three jobs. What each one removes, what it costs, and the order they have to go in.
Charcoal grill smoke: why the ESP goes second
Sparks, ash and heat — the three things that make solid fuel a different problem, and the stage order that survives them.
Installing an ESP filter: the seven decisions
Position relative to the fan, clearance for cell removal, drain routing, electrics — and the five mistakes that turn a good cabinet into a bad installation.
Kitchen exhaust discharge limits: three tests, not one
Three kinds of limit, what each measures, and the equipment that satisfies each one — with the honest limits of a manufacturer's document.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
