Guides
ESP selection, installation and maintenance guides — page 4
Notes written from site work: what decides a model, what actually causes efficiency to fall, and which specification mistakes are expensive to fix after commissioning.
- Sizing and duct pressure
- Cleaning intervals that hold
- Odour, carbon and stage order
- Inspection and compliance
Commercial kitchen air purifier: two different products, one name
One name covers a recirculating hood and an exhaust filter. They are not alternatives.
Precipitator in a kitchen: the site constraints nobody quotes for
The cabinet fits on paper. Five site realities decide whether it fits in the building.
Kitchen electrostatic precipitator: the specification that matters
Six lines on a data sheet, and the two that most quotes leave out.
Kitchen ESP: the abbreviation, decoded for a commercial kitchen
The short name for the cabinet between the hood and the fan — and the sizes that cover most kitchens.
Industrial electrostatic precipitator: scale changes the design
Six orders of magnitude of airflow, and the four things that scale with it.
Electrostatic dust precipitator: dust is not grease
Same field, different hazards: combustible dust changes the whole enclosure.
Electrostatic scrubber: the decision, not the description
Four questions that decide between a wet electrostatic scrubber and a dry cell with carbon.
Electrostatic scrubbers: when a wash tower meets a cell
Water removes what the field cannot charge; the field removes what water cannot wet.
Dry ESP: what the abbreviation changes
Same cell, different waste stream: three consequences of running without water.
Dry electrostatic precipitator: right for ash, wrong for grease
The cleaning method decides the application. Rapping works on ash; grease needs a wash.
Passive filtration: what it does before the ESP
The unpowered stage that protects the powered one — and the reason it is not an alternative.
The electrostatic system: five parts, one performance figure
Why buying the cabinet alone is only 40% of the decision.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
