Guides
ESP selection, installation and maintenance guides — page 3
Notes written from site work: what decides a model, what actually causes efficiency to fall, and which specification mistakes are expensive to fix after commissioning.
- Sizing and duct pressure
- Cleaning intervals that hold
- Odour, carbon and stage order
- Inspection and compliance
Electrostatic air filtration: where it sits among filter standards
Filter standards describe media. A precipitator is not media — so the comparison needs different numbers.
Electrostatic air purifiers compared: what the numbers mean
Five numbers that separate two units with identical marketing claims.
Electrostatic purifier: choosing between the three architectures
Geometry decides cleaning method, and cleaning method decides whether you can live with it.
ESP air purifier: three letters, two very different products
Same abbreviation, a hundredfold difference in airflow — and in what it is for.
Electrostatic air purifier: how it cleans without a filter
The trade is explicit: no consumables, but a wash regime you cannot skip.
Electrostatic precipitator air purifier: the commercial version
No media to buy, a wash instead of a replacement — and one limitation that decides the application.
Eco unit: what the term covers on a kitchen drawing
A trading name for the treatment train, not a technology. Read what is inside it.
Recirculation ventilation: when the duct is not an option
No duct, no discharge, no dilution — which means the filter train has to do all the work.
Restaurant indoor air quality: the part the extract hood does not fix
Cleaning the exhaust does not clean the room. Four measurements that explain the difference.
Kitchen exhaust filtration system: designing the whole line
One pressure budget from hood to roof, and the four places it usually goes wrong.
Kitchen exhaust filtration: the ladder from baffle to carbon
Four rungs, four price points, four different jobs. Most kitchens need two of them.
Commercial kitchen pollution control unit: what the term includes
PCU is a system term. Specifying it as a single product is where tenders go wrong.
Next step
Send the layout. We will confirm the model.
Appliance list, hood length and the duct route are enough to come back with a model, an airflow figure and a drawing. OEM and ODM enquiries welcome.
